Alltek Alpha Plus Décor (Tyrex)

Typical Spreadability

0.6 to 0.9 kg/m² per layer depending on smoothness of substrate.

Density

1,7 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 73%
• Solid content by volume: 54%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 12 to 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

• Min. thickness: 0,3 mm
• Max. thickness: 3 mm

• Ready to use
• Easy to apply.
• Ergonomic and rapid application, minimum retouching
• Excellent adhesive properties
• Very good spreading power
• Easily sanded
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification: group III class 2 as per AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608

• Returnable, stackable 112 l plastic drum with protective cover.
• Shelf life is 9 months in unopened original packaging, protected from frost and extreme heat.

• VOC content: < 1 g/l.

Substrates:

• Rough formwork.
• Terracotta bricks and tiles, plaster, gypsum blocks, plasterboard.
• Wood and wood products, old painted substrates in good condition

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Xtreme 60 pump system with 112 l drum (contact us).
• Airless 27 to 45 nozzles, depending on condition of substrate and equipment used (follow the manufacturer’s advice).
• Flexible smoothing knife of “Parfaitliss” type or similar (up to 1 metre wide on ceilings).
• Consult us for stippled finish.
• Sanding with grain size 150 to 220.

Recommendations:

• Ensure adequate ventilation to remove excess moisture and accelerate drying.