ICP Alltek

  1. ICP Alltek
  2. Products
  3. Coatings for manual application
  4. Alltek LF50

Alltek LF50

Manual lightweight fine skimming plaster

DESCRIPTION

Lightweight fine skimming plaster for manual application. Alltek LF50 is a ready-to-use white plaster for use on substrates with calcium carbonate fillers and other selected light fillers.

USE

  • Plaster for interiors, walls and ceilings on all standard substrates.
  • Enables creation of type A paint finishes.
Typical spreadability 1 litre/m² per mm of thickness.
Recommended thicknesses
  • Min. thickness: 0,1 mm
  • Max. thickness: 1 mm
Packaging
  • 4 litre plastic bucket.
  • 10 litre plastic bucket.

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

1 litre/m² per mm of thickness.

Density

1,3 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 74%
  • Solid content by volume: 67%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 2 to 6 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 0,1 mm
  • Max. thickness: 1 mm

CHARACTERISTICS

  • Easy to apply.
  • Excellent adhesive properties.
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per the standard AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608.

PACKAGING AND STORAGE

  • 4 litre plastic bucket.
  • 10 litre plastic bucket.
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  •  VOC content: < 2 g/l.
  •  Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, grainy wood.
  • On powdery substrates, apply a fixative.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Plastering knife.
  • Plaster trowel.
  • Flexible “Biflex” trowel or similar
  • Sanding with grain size 220 to 400.

Recommendations:

  • Ensure adequate ventilation to remove excess moisture and accelerate drying..

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/