ICP Alltek

  1. ICP Alltek
  2. Products
  3. Spray fillers
  4. Alltek Cachet Vert

Alltek Cachet Vert

Date de dernière modification

DESCRIPTION

Alltek Cachet Vert is an off-white plaster based on natural mineral fillers, with an organic binder and additives.

USE

  • Plaster for interiors, walls and ceilings on all standard substrates.
  • Ready filling and smoothing mixed plaster for remove surface irregularities before applying the skimming coat.
  • Direct application to aerated concrete, rough concrete.
Typical spreadability 3 to 6 kg/m² per layer depending on smoothness of substrate.
Recommended thicknesses
  • Min. thickness: 1 mm
  • Max. thickness: 4 mm
Packaging 25kg plastic bag with handle

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

3 to 6 kg/m² per layer depending on smoothness of substrate.

Density

1.7 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 77%
  • Solid content by volume: 61%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 24 to 36 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 1 mm
  • Max. thickness: 4 mm

CHARACTERISTICS

  • Ready to use
  • Excellent filling power.
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608.

PACKAGING AND STORAGE

  •  25kg plastic bag with handle
  •  Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • VOC content: < 1 g/l.
  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Concrete, aerated concrete and all standard substrates, old and new.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Stir before use.
  • Spraying machine with 4-6 mm nozzles.
  • Sanding with grain 80 to 100.

Recommendations:

  • Ensure adequate ventilation to remove excess moisture and accelerate drying.

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/