ICP Alltek

  1. ICP Alltek
  2. Products
  3. Tyrex system
  4. Alltek Spray Velours (Tyrex)

Alltek Spray Velours (Tyrex)

Matt velvet finish paint for Tyrex application

DESCRIPTION

Alltek Spray Velvet is a special paint with a matt velvet finish for airless application.

USE

Ideal for all new interior work and for refurbishment. Not suitable for damp rooms.
Typical spreadability 6 to 8 m²/l according to substrate and method of application.
Packaging Returnable, stackable 112 l plastic drum with the protective thermoplastic cover.

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

6 to 8 m²/l according to substrate and method of application.

Density

1,43 +/- 0,10 kg/l

Solid Content

  • Solid content by mass: 63%
  • Solid content by volume: 47%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • Dry to touch in 2 hrs.
  • Can be repainted in 8 h.

CHARACTERISTICS

  • Matt velvet finish
  • High opacity
  • Rapid drying, can be painted on the same day.
  • Contains a rust inhibitor.
  • Classification: group I, class 7b2 as per AFNOR NF T 36-005.

PACKAGING AND STORAGE

  • Returnable, stackable 112 l plastic drum with the protective thermoplastic cover.
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • EU limit value for this product (cat. A/a): 30 g/l (2010). This product contains max. of 5 g/l VOC.

METHOD OF APPLICATION

Substrates:

  • Concrete, cement rendering.
  • Terracotta bricks and tiles, plaster, gypsum blocks, plasterboard (except for water repellent products).
  • Wood and wood products, old painted substrates in good condition

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Airless spraying machine: airless nozzles 517 to 521.
  • Applied in criss-cross pattern.

Recommendations:

  • Ensure adequate ventilation to remove excess moisture and accelerate drying.

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/