Alltek UL

Typical Spreadability

1 liter/m² per mm of thickness.

Density

0,5 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 63%
• Solid content by volume: 85%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 2 h on average for a 1 mm application thickness.

Recommended thicknesses

• Min. thickness: 0,1 mm
• Max. thickness: 15 mm

• Alltek UL is a plaster with natural, ultralight fillers.
• Exceptionally easy to apply.
• Excellent adhesive properties.
• No shrinkage
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification: family III class 2 and family IV class 4b according to the AFNOR NF T 36-005 standard.
• Product complies with standard NF EN 16566.

• 310 ml cartbridge (réf. 102839).
• 1 liter pot (réf.101013).
• 4 liters plastic bucket (réf. 101011).
• Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

• VOC content: < 1 g/l.
• Indoor Air Emission Class

Substrates:

• Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, grainy wood, internal/external painted woodwork.
• On powdery substrates, apply a fixative.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Plastering knife.
• Work the product with a plastering knife before use.
• If necessary, add a little water then stir.
• Sanding with grain size P100 to P150.

Recommendations:

• Ensure adequate ventilation to remove excess moisture and accelerate drying.