Alltek Fine Violet 180 Airless

Typical Spreadability

0.7 to 1.5 kg/m² per layer depending on substrate and desired finish.

Density

1.7 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 77%
• Solid content by volume: 61%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 12 to 24 h on average, depending on :
  • application thickness,
  • temperature,
  • ventilation,
  • humidity,
  • and substrate type.
• Sanding and recoating: after complete drying.

Recommended thicknesses

• Min. thickness: 0,4 mm
• Max. thickness: 3 mm

• Ready to use
• Easy to apply.
• Outstanding filling and finish.
• Excellent adhesive properties : on rough formwork > 2.5 N/mm²
• Very good spreading power
• Possible to colour as needed (pastel paints).
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification: group III class 2 as per AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608.

• 25kg plastic bucket
• 25kg plastic bag with handle
• Shelf life is 9 months in unopened original packaging, protected from frost and extreme heat.

• VOC content: < 2 g/l.

Substrates:

• Poured concrete, rough concrete.
• Terracotta bricks and tiles, plaster, gypsum blocks, plasterboard.
• Wood and wood products, old painted substrates in good condition.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Airless 31 to 45 nozzles, depending on condition of substrate and equipment used (follow the manufacturer’s advice).
• High capacity Airless pump of typ GBT 500, Hemo 10, Wagner HC 960 et 970, ESSP or similar.
• For texturing finish, ask technical service.
• Smoothing blades of all sizes.

Recommendations:

• Ensure adequate ventilation to remove excess moisture and accelerate drying.