ICP Alltek

  1. ICP Alltek
  2. Products
  3. Decorative fillers
  4. Alltek Granifibre

Alltek Granifibre

Date de dernière modification

DESCRIPTION

Alltek Granifibre is a grainy decorative interior surfacing for machine application. Interspersed with small marble grains, it will mask small irregularities in the substrate.
Alltek Granifibre is white with a matt finish.

USE

Plaster for interiors, walls and ceilings on all standard substrates.
Typical spreadability 0.8 to 1.2 kg/m² per layer depending on smoothness of substrate.
Recommended thicknesses
  • Min. thickness: 0.3 mm
  • Max. thickness: 2 mm
Packaging 25 kg plastic bucket.

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

0.8 to 1.2 kg/m² per layer depending on smoothness of substrate.

Density

1.5 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 59%
  • Solid content by volume: 39%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 12 to 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 0.3 mm
  • Max. thickness: 2 mm

CHARACTERISTICS

  • Ready to use plaster
  • Interspersed with vermiculite grains
  • Odourless
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608.

PACKAGING AND STORAGE

  • 25 kg plastic bucket.
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • VOC content: < 1 g/l.
  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • On powdery substrates, apply a fixative.
  • Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, grainy wood.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Stir before use if necessary.
  • Spraying machine: 4-6 mm or 8 mm nozzles.
  • Pressure tank (can be diluted with up to 5% water if required).

Recommendations:

  • Ensure adequate ventilation to remove excess moisture and accelerate drying.

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/