ICP Alltek

  1. ICP Alltek
  2. Products
  3. Complementary products
  4. Alltek Tape + Etanch’R

Alltek Tape + Etanch’R

ALLTEK TAPE ETANCH'R
Date de dernière modification

DESCRIPTION
Technical self-adhesive membrane, existing in 60 mm or 90 mm large providing perimeter window seal for airtight internal joints with our ready-mixed sprayplaster Alltek Spray Etanch’R. This membrane is a polyethylene copolymer film with non-woven fleece fabric with a self-adhesive strip and on the other edge a polyester grid.

USE
  • The use of our membrane “Alltek Tape + Etanch’R” avoids any kind of contact with the sprayplaster on joineries where adhesive properties are lower.
Packaging
  • Box of 3 rolls (50m) for 60 mm large.
  • Box of 2 rolls (50m) for 90 mm large.

Détails

TECHNICAL SPECIFICATIONS

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

Cleaning tools

With water

CHARACTERISTICS
  • Dimensions : 60 mm * 50 m or 90 mm * 50 m

PACKAGING
  • Box of 3 rolls (50m) for 60 mm large.
  • Box of 2 rolls (50m) for 90 mm large.

METHOD OF APPLICATION

Substrates:

  • Smooth joinery surfaces

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Attach the adhesive part along the edge of the window or door frame.
  • Set folds of around 2 cm at each angle.
  • Dip the open mesh in the coating.

Recommendations:

  • To be used with our ready-mixed spray plaster “Alltek Spray Etanch’R” for ensuring the airtightness of large structures.
  • Ensure adequate ventilation to remove excess moisture and accelerate drying.