ICP Alltek

  1. ICP Alltek
  2. Products
  3. Coatings for manual application
  4. Alltek Exterior

Alltek Exterior

Date de dernière modification

DESCRIPTION

Lightweight plaster for repairs and skimming for manual application. Alltek Exterior is a ready-to-use grey plaster.

USE

  • Interior and exterior plaster for walls and ceilings on all standard substrates.
  • Especially suited for sealing cracks due to its great flexibility.
  • Alltek Exterior can be mixed with 10% Portland cement to improve its resistance to water and for greater application thicknesses.
  • Smooth finish after smoothing and sanding.
  • For external use, Alltek Exterior must be top coated.
Typical spreadability 1 litre/m² per mm of thickness.
Recommended thicknesses
  • Min. thickness: 0,3 mm
  • Max. thickness: 3 mm
Packaging 10 litre plastic bucket.

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

1 litre/m² per mm of thickness.

Density

1,4 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 75%
  • Solid content by volume: 65%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 0,3 mm
  • Max. thickness: 3 mm

CHARACTERISTICS

  • Alltek Exterior is a plaster with natural, light fillers.
  • Easy to apply.
  • Outstanding flexibility.
  • Excellent adhesive properties. > 1.1 MPa.
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608.

PACKAGING AND STORAGE

  • 10 litre plastic bucket.
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION

  • VOC content: < 1 g/l.
  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Application on all substrates: concrete, aerated concrete, mortar, plaster, gypsum blocks, plasterboard, cement, cinder blocks, bricks.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Plastering knife.
  • Plaster trowel.
  • Flexible “Biflex” trowel or similar
  • Sanding with grain size 100 to 150.

Recommendations:

  • Do not apply Alltek Exterior to damp substrates.

HEALTH AND SAFETY

The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/