Alltek Exterior

Typical Spreadability

1 liter/m² per mm of thickness.

Density

1,4 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 75%
• Solid content by volume: 65%

Application conditions

• +5°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

• Min. thickness: 0,3 mm
• Max. thickness: 3 mm

• Alltek Exterior is a plaster with natural, light fillers.
• Easy to apply.
• Outstanding flexibility.
• Excellent adhesive properties. > 1.1 MPa.
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification: group III class 2 and group IV class 4b as per the standard AFNOR NF T 36-005.
• Product complies with standard NF EN 16566.

• 10 liters plastic bucket (réf. 102443).
• Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

• VOC content: < 1 g/l.
• Indoor Air Emission Class

Substrates:

• Application on all substrates: concrete, aerated concrete, mortar, plaster, gypsum blocks, plasterboard, cement, cinder blocks, bricks.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Plastering knife.
• Plaster trowel.
• Flexible “Biflex” trowel or similar
• Sanding with grain size P100 to P150.

Recommendations:

• Do not apply Alltek Exterior to damp substrates.