Alltek SF30

Typical Spreadability

1 liter/m² per mm of thickness

Density

1,7 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 74%
• Solid content by volume: 56%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 2 to 12 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

• Min. thickness: 0,1 mm
• Max. thickness: 1 mm

• Easy to apply.
• Excellent adhesive properties.
• Outstanding smoothness.
• Ready to use.
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification : group III class 2 as per the standard AFNOR NF T 36-005.
• Product complies with standard NF EN 16566.

• Plastic tube 400 ml (réf. 101204).
• 3 liters plastic bucket (réf. 102440).
• Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

• VOC content: < 1 g/l.
• Indoor Air Emission Class

Substrates:

• Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, grainy wood.
• On powdery substrates, apply a fixative.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Plastering knife.
• Trowel with rounded points.
• Sanding with grain size P220 to P400.

Recommendations:

• Ensure adequate ventilation to remove excess moisture and accelerate drying..