Alltek Spray Mat (Tyrex)

Typical Spreadability

8 to 12 m²/l according to substrate and method of application.

Density

1,53 +/- 0,10 kg/l

Solid Content

• Solid content by mass: 60%
• Solid content by volume: 37%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• In dust free environment in 30 minutes
• Dry to touch in 2 hrs.
• Can be repainted in 8 h.

• Deep matt finish
• Highly opacifying
• Beautiful whiteness
• Rapid drying, can be painted on the same day.
• Contains a rust inhibitor.
• Classification: group I, class 7b2 as per AFNOR NF T 36-005.

• Returnable, stackable 112 l plastic drum with the protective thermoplastic cover.
• Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

• EU limit value for this product (cat. A/a): 30 g/l (2010). This product contains max. of 5 g/l VOC.

Substrates:

• Concrete, cement rendering.
• Terracotta bricks and tiles, plaster, gypsum blocks, plasterboard (except for water repellent products).
• Wood and wood products, old painted substrates in good condition

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Airless spraying machine: airless nozzles 517 to 521.
• Applied in criss-cross pattern.

Recommendations:

• Cannot be applied thickly.