Alltek Aquafibre

Typical Spreadability

2 to 3 kg/m² per layer depending on smoothness of substrate.

Density

1.7 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 54%
• Solid content by volume: 22%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 12 to 36 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

• Ready to use plaster
• Paintable with pastel paints
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification: group III class 2 as per AFNOR NF T 36-005, in compliance with standard AFNOR NF T 30-608.

• 25 kg plastic bucket.
• Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

• VOC content: < 1 g/l.
• Indoor Air Emission Class

Substrates:

• On powdery substrates, apply a fixative.
• Plaster, gypsum blocks, plasterboard, cement rendering, old walls, old paintwork, grainy wood.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Stir before use if necessary.
• Filling knife, trowel.
• Can be applied with spraying machine, 4-6 or 8mm nozzles.

Recommendations:

• Ensure adequate ventilation to remove excess moisture and accelerate drying.