Alltek LM150

Typical Spreadability

1 liter/m² per mm of thickness.

Density

1,1 +/- 0,1 kg/l

Solid Content

• Solid content by mass: 60%
• Solid content by volume: 52%

Application conditions

• +8°C to +35°C
• Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

• 12 to 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

• Min. thickness: 0,3 mm
• Max. thickness: 4 mm

• Easy to apply.
• Mainly used for preparation work.
• Excellent adhesive properties.
• Fire rating: A2-s1, d0 as per European standard EN 13501-1.
• Classification : group III class 2 as per the standard AFNOR NF T 36-005.
• Product complies with standard NF EN 16566.

• Plastic tube 400 ml (réf. 101202).
• 4 liters plastic bucket (réf. 101199).
• 10 liters plastic bucket (réf. 101009).
• Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

•  VOC content: < 2 g/l.
•  Indoor Air Emission Class

Substrates:

• Concrete, terracotta bricks and tiles, plaster, gypsum blocks, plasterboard.
• For refurbishment on glass web or textured plaster.
• Wood and wood products, old painted substrates in good condition.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Plastering knife.
• Plaster trowel.
• Flexible “Biflex” trowel or similar
• Sanding with grain size P150 to P220.

Recommendations:

• Ensure adequate ventilation to remove excess moisture and accelerate drying.