ICP Alltek

  1. ICP Alltek
  2. Products
  3. Coatings for manual application
  4. Alltek Blue Hydro

Alltek Blue Hydro

Date de dernière modification

DESCRIPTION
Lightweight bonding and filling plaster for jointing tapes and face work in damp rooms. Alltek Blue Hydro is a ready-to-use lightweight blue-green plaster.

USE
  • Plaster for damp interior rooms, walls and ceilings on all standard substrates.
  • Alltek Blue Hydro is primarily designed for jointing plasterboards in damp rooms. It may also be use as a smoothing and filling plaster.
Typical spreadability 1 litre/m² per mm of thickness.
Recommended thicknesses
  • Min. thickness: 0,3 mm
  • Max. thickness: 3 mm
Packaging
  • 3 liters plastic bucket (réf. 101201).
  • 10 liters plastic bucket (réf. 101200).

Détails

TECHNICAL SPECIFICATIONS

Typical Spreadability

1 liter/m² per mm of thickness.

Density

1,1 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 71%
  • Solid content by volume: 68%

Application conditions

  • +5°C to +35°C
  • Max. relative humidity 70%

pH

8 +/- 1

Cleaning tools

With water

Drying

  • 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 0,3 mm
  • Max. thickness: 3 mm

CHARACTERISTICS
  • Ready to use
  • Easy to apply.
  • Excellent adhesive properties.
  • Outstanding resistance to wet abrasion.
  • Excellent filling power.
  • Easily sanded.
  • Fire rating : C as per European standard EN 13501-1.
  • Classification : famille III classe 2 selon la norme AFNOR NF T 36-005.
  • Product complies with standard NF EN 16566 with resistance to wet abrasion
    in class A.
  • Product complies with standard NF EN 13963 with water absorption on waterre-
    pellent plasterboard in class H1.
  • Alltek Blue Hydro has protection to combat the appearance of mold.

PACKAGING AND STORAGE
  • 3 liters plastic bucket (réf. 101201).
  • 10 liters plastic bucket (réf. 101200).
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.

ENVIRONMENTAL INFORMATION
  • VOC content: < 2 g/l.
  • Indoor Air Emission Class

METHOD OF APPLICATION

Substrates:

  • Waterpoofed plasterboard, tiles.
  • Glass web, plaster, gypsum blocks, bricks, concrete, old painted substrates, non-flaking and in good condition.

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.
  • The plasterboard must be fixed and compliant with DTU 25-41.

Application tips:

  • Stir before use if necessary.
  • Plaster over any screw heads.
  • Fill the feathered sections of plasterboard with Alltek Blue Hydro. Bond then press on the jointing tape.
  • After drying, apply one or two finish coats.
  • Sanding with grain size P100 to P150.

Recommendations:

  • Alltek Blue Hydro is not used under a tiled finish.

HEALTH AND SAFETY
The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/