ICP Alltek

  1. ICP Alltek
  2. Products
  3. Spray fillers
  4. Alltek NL 100

Alltek NL 100


Alltek NL100 is a ready mixed, bright white washable plaster.
It has a particularly high resistance to wet abrasion: class A as per the standard NFT 30-608. Alltek NL100 is certified according to the Netherlands standard COT 83.00 due to its very good mechanical properties.


  • Plaster for interiors, walls and ceilings on all standard substrates.
  • For bubbling and raking before painting, wallpaper and wall coverings.
  • In the sprayed state for a textured finish.
  • Recommended for busy communal areas (staircases, corridors) and for damp rooms (kitchens, bathrooms) subject to high mechanical loads.
  • Alltek NL100 can be used in environments with chlorinated atmospheres.
  • Can be coated with all types of coverings and paints (matt, satin or gloss).
Typical spreadability 0.7 to 1.5 kg/m² per layer depending on substrate and desired finish.
Recommended thicknesses
  • Min. thickness: 0,4 mm
  • Max. thickness: 3 mm
Packaging 25kg plastic bag with handle



Typical Spreadability

0.7 to 1.5 kg/m² per layer depending on substrate and desired finish.


1.7 +/- 0,1 kg/l

Solid Content

  • Solid content by mass: 78%
  • Solid content by volume: 62%

Application conditions

  • +8°C to +35°C
  • Max. relative humidity 70%


8 +/- 1

Cleaning tools

With water


  • 12 to 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

Recommended thicknesses

  • Min. thickness: 0,4 mm
  • Max. thickness: 3 mm


  • Ready to use
  • Outstanding resistance to wet abrasion.
  • Excellent durability.
  • Brilliant whiteness.
  • Excellent adhesive properties: on rough concrete > 2.6 N/mm².
  • Very good spreading power.
  • Good filling properties.
  • Possible to colour as needed (pastel paints).
  • Fire rating: A2-s1, d0 as per European standard EN 13501-1.
  • Classification: group III class 2 as per the standard AFNOR NF T 36-005, in compliance with the standard AFNOR NF T 30-608
  • Certification: COT 83.00 (available on request)


  • 25kg plastic bag with handle
  • Shelf life is 1 year in unopened original packaging, protected from frost and extreme heat.


  • VOC content: < 1 g/l.
  • Indoor Air Emission Class



  • Poured concrete, rough concrete.
  • Terracotta bricks and tiles, plaster, gypsum blocks, plasterboard.
  • Wood and wood products, old painted substrates in good condition

Preparation of substrate:

  • The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

  • Stir before use if necessary.
  • Spraying machine nozzle 3 to 6 mm, depending on condition of substrate and equipment used (follow the manufacturer’s advice).
  • Suitable high-pressure airless screw pump spraying machine (contact us).
  • Smoothing blades of all sizes.
  • If sanding is required, it should be performed no later than 48 hours after application.


  • Ensure adequate ventilation to remove excess moisture and accelerate drying.


The safety information sheet is available from: www.icp-alltek.com/en-gb/documentation/