Aquafill Lissage

Grain size

Maximum filler grain size: < 0.1 mm

Typical Spreadability

0.25 kg of powder / m².

• Powder: 0.8 +/- 0.1 kg/l
• Paste: 1.6 +/- 0.1 kg/l

Application conditions

• +8°C à +35°C
• Hygrométrie maximum 70% H.R

pH

8 +/- 1

Cleaning tools

With water

Drying

• 12 to 24 h on average, depending on application thickness, temperature, ventilation, humidity and substrate type. Sanding and recoating: after complete drying.

• Excellent adhesive properties
• Perfect finish
• Fine plaster

• 15 kg plastic bucket.
• Shelf life is 9 months in unopened original packaging, protected from frost and extreme heat.

• Indoor Air Emission Class

Substrates:

• Plaster, gypsum blocks, plasterboard, cement rendering if the substrate is in good condition.

Preparation of substrate:

• The substrates, preparatory work and application conditions must be compliant with applicable building trade regulations (e.g. DTU) and standards.

Application tips:

• Make up the mixture: the mixing ratio compared to the powder weight is 50% or about 7-8 litres of water per 15 kg bucket. Pour the powder into the water.
• Effective usage time: 45 mins.
• Apply with filling knife or plaster trowel.
• Sanding with grain size 100 to 150.

Recommendations:

• Ensure adequate ventilation to remove excess moisture and accelerate drying.